Mirka Abralon Discs are an exceptional, multifunctional patented sanding material with a hook and eye backing.  It can be used for sanding both flat and profiled surfaces.

To reduce the risk of pressure marks, Mirka Abralon creates a smooth sanding pattern on angled surfaces and edges.  Recommended for use in the automotive, wood finishing and marine industries, the supple weave of Mirka Abralon allows water and air to pass freely, allowing this product to be used for both dry and wet sanding, either by machine or hand.

Mirka Abralon is also recommended for the finishing and pre-polishing of gelcoat, SMC, glass reinforced plastic (GRP), lacquers, etc.

Please note:
Coarser grits are recommended for surface preparation of composite body parts and fine sanding of the body surfaces before primer and top lacquer applications.
Finer grits are suitable for smoothing of primers and bottom lacquers and the preparation of surfaces between blending. They are also suitable for the sanding of pot marked surfaces and the preparation of the top coat prior to polishing.

Abralon is often used for wet sanding but can also be used for dry sanding in the coarser grits.  Please note that due to the soft, foam construction of Abralon discs, the use of Interface Pads is not recommended.

SPECIFICATIONS:

Mirka has been a leading manufacturer and supplier of abrasives to the wood and furniture industry for over three decades, as well as the marine and automotive industries. Specialising in coated, non-woven, dust-free sanding products for surface finishing.